Chapter 5: Using the Web Interface
58
4. Click OK to save the changes.
Changing the Telnet Settings
You can enable or disable the Telnet access to the command line interface,
or change the default TCP port for the Telnet service.
To change the Telnet service settings:
1. Choose Device Settings > Network Services > Telnet. The Telnet
Settings dialog appears.
2. To use a different port, type a new port number in the field. Valid range
is 1 to 65535.
3. To enable the Telnet application, select the Enable Telnet Access
checkbox. To disable it, deselect the checkbox.
4. Click OK to save the changes.
Configuring the SNMP Settings
You can enable or disable SNMP communication between an SNMP
manager and the Dominion PX device. Enabling SNMP communication
allows Dominion PX to send SNMP trap events to the manager, as well as
allows the manager to retrieve and control the power status of each outlet.
To configure the SNMP communication:
1. Choose Device Settings > Network Services > SNMP. The SNMP
Settings dialog appears.
2. Select the "enable" checkbox in the "SNMP v1 / v2c" field to enable
communication with an SNMP manager using SNMP v1 or v2c
protocol.
Commentaires sur ces manuels