Raritan PX-1000 Series Guide de l'utilisateur télécharger pdf (Page 42)

Chapter 4: Using the PDU

Port Used for...

FEATURE Connection to some Raritan access products (such as Dominion KX II)

through the use of a power CIM, OR --

Connection to a Raritan Asset Management Sensor, which allows you to

track the locations of the IT devices in the rack. See Connecting the Asset

Management Sensor (Optional) (on page 25).

Warnin

g: This is not an RS-232 port so do NOT plug in an RS-232 device, or

damages can be caused to the device.

CONSOLE/

MODEM

Establishing a serial connection between a computer and the Dominion PX

device:

This is a standard DTE RS-232 port. You can use a null-modem cable with

two DB9 connectors on both ends to connect Dominion PX to the computer.

SENSOR Connection to Raritan's environmental sensors.

For Zero U products, a sensor hub is required if you want to connect more

than one environmental sensor.

ETHERNET Connecting the Dominion PX device to your company's network:

Connect a standard Cat5e/6 UTP cable to this port and connect the other end

to your network. This connection is necessary to administer or access the

Dominion PX device remotely using the web interface.

There are two small LEDs adjacent to the port:

 Green indicates a physical link and activity.

 Yellow indicates communications at 10/100 BaseT speeds.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 257 258

Pas de commentaire

Raritan PX-1000 Series Guide de l'utilisateur Page 42