Raritan Dominion KX Guide de l'utilisateur télécharger pdf (Page 34)

Chapter 2: Installation and Configuration

Note: If you are using virtual media, you must use the USB connection.

Diagram key for PS/2 connections

KX II-101-V2

Target server

Local monitor

Local mouse and keyboard (optional)

Video connection from the KX II-101-V2 to the

target

KVM cable connection from the KX II-101-V2

to the target server

Optional KX II-101-V2 to monitor connection

Optional PS/2 to USB adapter connection

(cable not included) from target to keyboard

and mouse

C: Network

Connect a standard Ethernet cable from the network port labeled LAN to

an Ethernet switch, hub or router. The LAN LEDs that appear above the

Ethernet connection indicate Ethernet activity. The yellow one blinks

while the KX II-101-V2 is in use, indicating IP traffic at 10 Mbps. The

green light indicates a 100 Mbps connection speed.

D: Admin Port

The Admin port enables you to perform configuration and setup for the

KX II-101-V2 using a terminal emulation program like HyperTerminal.

Use one DB9M to DB9F straight serial cable to connect from the KX II-

101-V2 to the serial port on your PC or laptop. The serial port

communication settings should be configured as follows:

 115,200 Baud

 8 data bits

 1 stop bit

 No parity

 No flow control

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 222 223

Pas de commentaire

Raritan Dominion KX Guide de l'utilisateur Page 34