Raritan Dominion KX Guide de l'utilisateur télécharger pdf (Page 135)

Chapter 6: Device Management

127

Managing KVM Target Servers (Port Page)

This Port page opens when you select a port from the Port Configuration

page that is connected to a target server. From this page, you can make

power associations and change the Port Name to something more

descriptive.

A server can have up to four power plugs that you can associate with the

power strip. In this page, you can define those associations so that you

can power on, power off, and power cycle the server from the Port

Access page, as shown below.

Note: To use this feature, you must have a Raritan Dominion PX power

strip attached to the device. See Connecting the Power Strip.

To access a port configuration:

1. Choose Device Settings > Port Configuration. The Port Configuration

page opens.

2. Click the Port Name for the port you want to edit.

Note: The Power Port 1 link is enabled only when a Raritan power strip is

connected to the KX II-101-V2 and configured. Otherwise, the link is

disabled.

Renaming a Port

To change the port name:

1. Enter a descriptive name, such as the name of the target server. The

name can be up to 32 alphanumeric characters and can include

special characters.

Note: Do not use apostrophes for the Port Name.

2. Click OK.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 222 223

Pas de commentaire

Raritan Dominion KX Guide de l'utilisateur Page 135