Raritan AUATC Manuel d'utilisateur télécharger pdf (Page 19)

APPENDIX A: FAQ 11

Appendix A: FAQ

PROBLEM SUGGESTED SOLUTION

I do not get a device prompt

(a) Check all connectors and make sure the 6V DC power supply is

connected securely.

(b) If you have the AUATC screen displayed with top and bottom help

windows, make sure the status indicates “On Line”. If not press <Esc>

to return to On-line status.

being displayed on the serial communication set up screen.

Press <Alt-F2> to show the screen.

(d) Make sure you are using a RS232 null-modem

cable.

(e) Make sure your device is powered ON.

No video display, or video is

scrambled

(a) Make sure your monitor can handle a video resolution of 800x600 with

60 Hz refresh rate.

(b) If you are using Sun keyboard, by default the HD15 video port will

generate composite sync signal for Sun monitor. You may need a 1397

adapter (HD15 to 13W3) to connect a Sun monitor to the HD15 video

port on the AUATC. Or you can go to the set up screen

(press <Alt-F2>) to change video output to be VGA video with a Sun

keyboard and use a VGA monitor.

Keyboard connected to AUATC

does not work

If you have changed keyboards, you may not have powered OFF the

AUATC before doing so. Power off the AUATC, reconnect the keyboard,

and power ON the AUATC.

1 2 ... 14 15 16 17 18 19 20

Pas de commentaire

Raritan AUATC Manuel d'utilisateur Page 19